HXXF Solar Automatic Drip Irrigation Kit System, Solar Powered Auto Easy DIY Watering Device Supported Pots Plants, Multiple Timing Modes with Anti-Siphoning Device (Supported 10-15 Pots)

Water More Plants - The drip irrigation kit system provide more and long accessories - 32 ft tubes, 15 watering stakes, 15 T-joints, 1 Filter, 1 One-way valve, 1 Ground Stake, 2 Screw, 1 Charging cable, to help you DIY and water as many plants as possible.You can cut the water pipes and design an exclusive irrigation system for your plants, like flowers, vegetables,fruits. Multiple Timer Modes & Energy Saving - Using watering stakes can save at least 70% more water than using traditional spray & drip heads. Settable multiple timer modes, which watering duration time is from 0 to 5mins, watering interval time is from 1-10 days, 1H, 3H, 5H, 7H, 9H, HH(HH means 12-hours interval for watering twice a day). Once set up, the indoor plant watering system will work automatically, and you will rejoice as the plant thrives. Long Vacation without worrying about plants - It's solar powered, and has the most power on the days water is needed most. It still functions after a few overcast days. 20-30 days duration after full charged. Just prepare a big container of water, select the watering frequency with the number of drippers. Then go for a happy long vacation. Indoor&Outdoor Application - The water irrigation system is equiped with IP67 waterproof and sunlight resistance durable material. It can be used both indoors and outdoors. Fix the product in a position where the solar panel can be exposed to direct sunlight and the side with the switch button must be faced down. The product can be inserted into the soil by using the ground stake, or be fixed with screws on the wall, fence, etc. Operation instrctions If your plants need: Watering every day at 11 am, 1minute each time, then you only have to be at 11 am.  Step 1  Long press the button"on/off switch"(3 seconds). Indicating that it has been turned on, then press the button(3 seconds) Indicating that it has been turned off. If you find a setup error, then press this key to set the reset. Step 2 set the : watering time"to"60"s. Step 3 interval time set to "01"it will enter to the first wartering and the indicator will fash green (5S) light quickly after 60 seconds , the device enters to sleep mode, by 11 am the next day, the device will work again, and goes round and round. Press any key to wake up the machine, "Interval time" button to set the days of watering intervals (1-10day,1H,3H,5H,7H,9H, HH), 0 Means no work, HH means 12-hours interval for watering twice a day, 1 means watering once a day, 2 is watering once every 2 days, and so on. The "Wartering Time" button sets the single watering time (0-300s), long press can be set quickly, 01 is watering for 1 second, 02 is watering for two seconds, and after 20s, the time is incremented every 5seconds until 90S, After 90S press again is H2 (two minutes), press more again H5 (5minutes) and so on. Watering is starting after 3seconds of the setting is successful. The mercury output is 13mL/s, and the watering is automatically completed by setting as needed. The watering time is subject to the latest setting.